Not Sure?
Ask a Question

C63600 Silicon Aluminum Bronze

Shapes Available

C63600 Silicon Aluminum Bronze

Typical Uses for C63600 Silicon Aluminum Bronze:

ELECTRICAL: Cold Headed Nuts, Cable Connectors, Components for Pole Line Hardware

FASTENERS: Screw Machine Products, Bolts

INDUSTRIAL: Valve Components, Nuclear Power Service

Request a Quote

Al As Cu Fe Pb Ni Si Sn Zn
Min/Max 3.0 - 4.0 0.15 Rem 0.15 0.05 0.15 0.7 - 1.3 0.2 0.5
Nominals 3.5000 - 95.5000 - - - 1.0000 - -
Product Type Temper Type
Information not available on website
Temper Sect. Size Cold Work Type Min Temp Tensile Strength YS
0.05% UL
YS
0.02% Offset
YS
0.005% Offset
Elong. RH
B
RH
C
RH
F
RH
30T
VH
500
BH
500
BH
3000
Shear
Strgth
Fatigue
Strgth
Izod
Impact
Strgth
- in. % - F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb
- mm. - - C MPa MPa MPa MPa - - - - - - - - MPa MPa J
O61 0 68 60 - - - - - - - - - - - - -
O61 0 0 TYP 20 414 - - - 64 - - - - - - - - - 0
H01 0 68 74 - - - - - - - - - - - - -
H01 0 0 TYP 20 510 - - - 31 - - - - - - - - - 0
WIRE
H00 0.42 68 68 - - - - - - - - - - - - -
H00 10.7 7 TYP 20 469 - - - 52 71 - - - - - - - - 0
O61 0.39 68 60 - - - - - - - - - - - - -
O61 10 0 TYP 20 414 - - - 67 - - - - - - - - - 0
H01 0.49 68 84 - - - - - - - - - - - - -
H01 12.4 21 TYP 20 579 - - - 29 84 - - - - - - - - 0
Product Property US Customary Metric
Coefficient of Thermal Expansion 9.4 . 10-6 per oF (68-572 F) 16.9 . 10-6 per oC (20-300 C)
Density 0.301 lb/in3 at 68 F 8.33 gm/cm3 @ 20 C
Electrical Conductivity 12 %IACS @ 68 F 0.07 MegaSiemens/cm @ 20 C
Electrical Resistivity 86.4 ohms-cmil/ft @ 68 F 14.36 microhm-cm @ 20 C
Melting Point - Liquidus 1890 F 1032 C
Modulas of Elasticity in Tension 16000 ksi 110000 MPa
Specific Gravity 8.33 8.33
Thermal Conductivity 33.0 Btu . ft/(hr . ft2 . oF)at 68F 57.1 W/m . oK at 20 C
Joining Technique Suitability
Brazing Not Recommended
Butt Weld Fair
Capacity for Being Cold Worked Excellent
Capacity for Being Hot Formed Fair
Coated Metal Arc Welding Fair
Gas Shielded Arc Welding Fair
Machinability Rating 40
Oxyacetylene Welding Not Recommended
Seam Weld Fair
Soldering Not Recommended
Spot Weld Fair
End Product Specification
Information not available on website