Your RFQ Cart has: 0 item(s) !
National Bronze & Metals, Inc. National Bronze & Metals, Inc.
   LEADING USA MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE & COPPER ALLOYS
HOME | LOGIN / REGISTER | LOCATIONS | RFQ CART
Toll Free: 800-231-0771  
Click to Email Us  
Search

Oil & Gas Application

National Bronze & Metals, Inc. (NBM) has brought together a range of copper alloys, specifically for oil & gas applications so as to provide you with one source to turn to for your ongoing requirements.

This family of copper alloys is used for a wide variety of applications, such as flex shafts, valve stems, pump shafts, BOP parts, rock bit bearings and bushings, pump impellers, wear plates, marine hardware, valve seats and many other high demanding applications where heavy loads, corrosion, conductivity and/or abrasion are issues of concern. You will find that we have the right copper alloys that you and the entire oil & gas industry demand ready for immediate shipment to anywhere in the United States or across the world.

Download our brochure containing this information on copper alloys for the Oil & Gas Industry.

C10200 (ASTM B-187)
Oxygen Free Copper


C11000 (ASTM B-187)
Electrolytic Tough Pitch Copper


Available in solid bars, bus tubes, and bus bars
For most industrial applications, these alloys are considered to be pure copper. As such, they are best known for their highly conductive properties and usage in both thermal and electrical applications. These alloys are non-corrosive, highly malleable, and ductile. Uses include bus bar and heat transfertype applications.

Download PDF Spec sheet for C10200.

Download PDF Spec sheet for C11000.
C17200 (ASTM B-196) Beryllium Copper

Tempers Available: TF00, TB00, DST, FMC Overaged

Available in solid & hollow bars, and plates


This copper alloy can have the highest mechanical properties of all copper alloys. This alloy also has excellent bearing qualities with extremely high compressive strength for high loading applications.It also has excellent abrasion and corrosion resistant properties, plus outstanding cryogenic characteristics.

Download PDF Spec sheet for C17200.
C36000 (ASTM B-16)
Free Machining Brass


Available in solids & hollow bars, flat bars, hex, and squares



This alloy sets the standard for machinability, and is used for the manufacturing of various machined components. Free machining brass can also be thread rolled and deep drilled. Primary applications include fluid connectors, low pressure valves, and gas fittings.

Download PDF Spec sheet for C36000.
C10200 (ASTM B-187)
Oxygen Free Copper


C44300 (ASTM B-111)
Admiralty Brass


Available in tubes
Usually made to order to meet the engineering requirements of the Oil & Gas industry, this alloysthermal conductivity and non-corrosive properties has it utilized in heat exchange applications. Other applications include artificial lift hydraulics, and pneumatic pump liners.

Download PDF Spec sheet for C44300.
C46400 (ASTM B-21, AMS 4611)
Naval Brass - Lead Free


Available in solid bars, hex bars, flats, and plates


This lead free alloy maintains a machinability of 30% and posses mechanical properties better than regular brass. Typical uses are in seal glands, nuts, valve stems & seats. Its name "Naval Brass" stems from its marine application usage such as marine hardware, flanges, baffle plates, and end plates (Discs) for heat exchangers.

Download PDF Spec sheet for C46400.
C63000
(ASTM B-150, B-124, B-171, B-283, AMS 4640)
Nickel Aluminum Bronze


Available in solid bars and plates

A high strength, tough nickel aluminum bronze used where high mechanical properties are required. This alloy is a heat treatable aluminum bronze containing 5% nickel, that provides excellent bearing properties with good corrosion resistance. It is used extensively for valve stems, pump shafts, seal glands, and BOP parts

Download PDF Spec sheet for C63000.
C10200 (ASTM B-187)
Oxygen Free Copper


C63020 (ASTM B-150, AMS 4590)
Nickel Aluminum Bronze


Available in solid bars
A special heat treatment process improves the mechanical properties beyond the range of commercial aluminum bronzes. This alloy is an extra high strength version of nickel aluminum bronze. It is used where parts require extra high strength and hardness with some ductility and toughness. Typical applications include rock bit bearing bushings and washers involving heavy loads, abrasion and high deformation. The extra high strength characteristics provide extreme wear resistance for extreme loads, abrasive wear, such as BOP parts, and wellhead components.

Download PDF Spec sheet for C63020.
C86300 (ASTM B-505, B-271, AMS 4862)
Manganese Bronze


Available in solid & hollow bars and wear plates


This cast manganese bronze is typically supplied in continuous cast or centrifugally cast bars and tubes for high load bearing applications. This material achieves over 110 ksi tensile strength and an elongation of 14% minimum. It is excellent in applications requiring high strength metal to metal wear such as wear bushings, pump impellers, and linage bushings.

Download PDF Spec sheet for C86000.
C95800 (ASTM B-505, B-271) "Alpha" Nickel Aluminum Bronze

Available in solid & hollow bars and wear plates


This alloy is typically used for parts that come in contact with sea water. Bars can be supplied in a stress relieved condition so as to prevent "stress corrosion cracking." Typical applications are for vertical turbine pumps, propeller hubs and blades, and other marine hardware and fittings.
C93200 (ASTM B-505, B-271)
High Leaded Tin Bronze "SAE 660"


Available in solid & hollow bars, wear plates, and shapes

This alloy is the most popular of the bearing bronzes. It has outstanding bearing properties at low and medium loads. Also, its 7% lead content makes it highly machinable. Many rotating parts of modern drilling rigs utilize this low friction, general purpose bronze alloy.

Download PDF Spec sheet for C93200.
C95400 (ASTM B-505, B-271, AMS 4871, 4873)
Aluminum Bronze "9C"


Available in solid & hollow bars and wear plates
This is the most popular aluminum bronze and is used in a lot of different industrial applications. This extra tough bearing material is used for heavy loads with good resistance to impact and corrosion. Aluminum bronze has a lot of good properties and is the most readily available high strength bearing material. Additional applications include wear plates, mechanical guides, marine hardware, and valve seats

Download PDF Spec sheet for C95400.
 
Browse By Metal
Browse By Metal


 
Company Information
About Us
Contact Us
Privacy Policy
Terms of Use
Products
Brass Alloys
Bronze Alloys
Copper Alloys
Industries
Oil & Gas
Aerospace
RWMA
Lead Free
Sheet & Plate
Brass Tube & Pipe
Resources
Accrediations & Certificates
Spec Sheet / Product Information
Industry Links
NBM Toolbox
Locations
Houston, TX
Lorain, OH

Sign Up for Email Updates!

Get National Bronze & Metals, Inc. Updates. Sign-up for email updates to receive current Company and Special informaiton.

  
© Copyright 1983 - 2010 National Bronze & Metals, Inc. ALL Rights RESERVED