Details
C11000 Electrolytic Tough Pitch Copper

C11000 Electrolytic Tough Pitch (ETP) Copper is noted for its high electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification. This copper has excellent hot workability. It becomes soft and ductile at a red heat.

  • C11000 SPEC SHEET - Download information on alloy C11000 Electrolytic Tough Pitch Copper.
  • Download our brochure containing this information on copper alloys for the Oil & Gas Industry.
  • Download our brochure containing this alloy available in Sheet & Plate

Available Sizes

For information on the availability of other forms on this particular alloy, please contact one of our friendly sales representatives at 713-869-9600 or fill out our online RFQ form.

C11000 Sheet - ASTM B-152 (06), ASTM B-248 (06)
THICKNESS X WIDTH
IN INCHES		 LBS / Sq Inch Temper
0.032 X 36 0.0104 H01 - 1/4 Hard
0.040 X 36 0.013 H01 - 1/4 Hard
0.063 X 36 0.0203 H01 - 1/4 Hard
0.093 X 36 0.0298 H01 - 1/4 Hard
0.125 X 36 0.04022 H01 - 1/4 Hard
C11000 Rounds - ASTM B-187
DIA IN INCHES LBS / FOOT
3/16 0.11
1/4 0.19
5/16 0.30
3/8 0.43
7/16 0.58
1/2 0.76
9/16 0.96
5/8 1.18
11/16 1.43
3/4 1.71
13/16 2.00
7/8 2.32
1 3.03
1 1/8 3.84
1 1/4 4.74
1 3/8 5.73
1 1/2 6.82
1 5/8 8.01
1 3/4 9.29
2 12.13
2 1/4 15.36
2 1/2 18.96
2 3/4 22.94
3 27.30
3 1/4 32.04
3 1/2 37.16
4 48.53
4 1/2 61.42
5 75.83
5 1/2 91.76
6 109.20
6 1/2 128.15
7 148.63
7 1/2 170.62
8 194.13
9 245.69
10 303.32
11 367.02
12 436.79
13 512.62
14 594.52
15 682.48
C11000 Rectangles - ASTM B-187
THICKNESS X WIDTH
IN INCHES		 LBS / FOOT
1/8 X 1/2 0.24
1/8 X 3/4 0.36
1/8 X 1 0.48
1/8 X 1 1/2 0.72
1/8 X 2 0.97
3/16 X 3/4 0.54
3/16 X 1 0.72
3/16 X 2 1.45
1/4 X 1/2 0.48
1/4 X 1 0.97
1/4 X 1 1/4 1.21
1/4 X 1 1/2 1.45
1 1/4 X 1 3/4 1.69
1/4 X 2 1.93
1/4 X 2 1/4 2.17
1/4 X 2 1/2 2.42
1/4 X 3 2.90
1/4 X 3 1/2 3.38
1/4 X 4 3.86
1/4 X 5 4.83
1/4 X 6 5.80
3/8 X 1 1.45
3/8 X 1 1/2 2.17
3/8 X 2 2.90
3/8 X 2 1/2 3.62
3/8 X 3 4.35
3/8 X 4 5.80
3/8 X 5 7.25
3/8 X 6 8.69
3/8 X 8 11.59
1/2 X 1 1.93
1/2 X 1 1/2 2.90
1/2 X 2 3.86
1/2 X 2 1/2 4.83
1/2 X 3 5.80
1/2 X 4 7.73
1/2 X 5 9.66
1/2 X 6 11.59
1/2 X 8 15.46
5/8 X 1 2.42
5/8 X 1 1/2 3.62
5/8 X 2 4.83
5/8 X 2 1/2 6.04
5/8 X 3 7.25
5/8 X 4 9.66
5/8 X 5 12.08
5/8 X 6 14.49
3/4 X 1 2.90
3/4 X 1 1/2 4.35
3/4 X 2 5.80
3/4 X 2 1/2 7.25
3/4 X 3 8.69
3/4 X 4 11.59
3/4 X 5 14.49
3/4 X 6 17.39
1 X 1/2 5.80
1 X 2 7.73
1 X 2 1/2 9.66
1 X 3 11.59
1 X 4 15.46
1 X 5 19.32
1 X 6 23.18
1 1/2 X 2 11.59
1 1/2 X 2 1/2 14.49
1 1/2 X 3 17.39
1 1/2 X 4 23.18
1 1/2 X 5 28.98
1 1/2 X 6 34.78
2 X 3 23.18
2 X 4 30.91
2 X 5 38.64
2 X 6 46.37
C11000 Squares - ASTM B-187
THICKNESS LBS / FOOT
1/4 0.24
3/8 0.54
1/2 0.97
5/8 1.51
3/4 2.17
7/8 2.96
1 3.86
1 1/8 4.89
1 1/4 6.04
1 1/2 8.69
1 3/4 11.83
2 15.46
2 1/4 19.56
2 1/2 24.15
2 3/4 29.22
3 34.78

Typical Uses for C11000 Electrolytic Tough Pitch Copper

Architecture: Skylight Frames, Roofing, Building Fronts, Flashing, Gutters, Spouting, Downspouts

Automotive: Gaskets, Radiators

Builders Hardware: Butts, Tacks, Nails, Soldering Copper, Rivets, Cotter Pins, Ball Floats

Building: Screening, Wire Screening

Consumer: Christmas Ornaments

Electrical: Terminals, Switches, Radio Parts, Contacts, Trolley Wire, Magnet Wire, Busbars, Terminal Connectors, Conductors, Electrical, Stranded Conductors, Wire, Electrical

Fasteners: Fasteners

Industrial: Printing Rolls, Chimney Cap Screens, Heat Exchangers, Anodes, Kettles, Chlorine Cells, Rotating Bands, Road Bed Expansion Plates, Vats, Pressure Vessels, Chemical Process Equipment, Panss

Chemical Composition for C11000

(%max., unless shown as range or min.)

  Cu(1) O
Min./Max. 99.90 min -
Nominal - .04

(1) Cu value includes Ag.
Note: This is a high conductivity copper which has, in the annealed condition a minimum concuctivity of 100% IACS except for Alloy C10100 which has a minimum conductivity of 101% IACS.
Note: Oxygen and trace elements may vary depending on the process.