Details
C10100 Oxygen Free Electronic Copper
C10100 Oxygen Free Electronic Copper characteristics are high ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low volatility under high vacuum.
- Download our brochure containing this alloy available in Sheet & Plate
Available Sizes
For information on the availability of other forms on this particular alloy, please contact one of our friendly sales representatives at 713-869-9600 or fill out our online RFQ form.
| THICKNESS X WIDTH IN INCHES |
LBS / Sq Inch | Temper |
|---|---|---|
| 3/16 X 48 | 0.0606 | H00-H01 |
| 1/4 X 48 | 0.0808 | H00-H01 |
| 5/16 X 48 | 0.1009 | H00-H01 |
| 3/8 X 48 | 0.1211 | H00-H01 |
| 7/16 X 48 | 0.1413 | H00-H01 |
| 1/2 X 48 | 0.1615 | H00-H01 |
| 5/8 X 48 | 0.2019 | H00-H01 |
| 3/4 X 48 | 0.2423 | H00-H01 |
| 1 X 48 | 0.3229 | H00-H01 |
| 1 1/4 X 48 | 0.4037 | H00-H01 |
| 1 1/2 X 48 | 0.4844 | H00-H01 |
| 1 3/4 X 48 | 0.5652 | M20 (hot rolled) |
| 2 X 48 | 0.6459 | M20 (hot rolled) |
| 2 1/2 X 48 | 0.8074 | M20 (hot rolled) |
| 3 X 48 | 0.9688 | M20 (hot rolled) |
| 3 1/2 X 48 | 1.1303 | M20 (hot rolled) |
| 4 X 48 | 1.2918 | M20 (hot rolled) |
Typical Uses for C10100 Oxygen Free Electronic Copper
Automotive: Automotive Rectifiers
Electrical: Transistor Component Bases, High Resistance-Ratio Cryogenic Shunts, Bus Conductors, Wave Guides, Hollow Conductors, Anodes for Vacuum Tubes, Coaxial Cable, Coaxial Tube, Klystrons, Microwave Tubes, Bus Bars, Lead-in Wire, Vacuum Seals, Conductors, Glass-to-Metal Seals
Chemical Composition for C10100
(%max., unless shown as range or min.)
| Cu(1) | Sb | As | O | P | Te | |
|---|---|---|---|---|---|---|
| Min./Max. | 99.99 min | .0004 | .0005 | .0005 | .0003 | .0002 |
| Nominal | - | - | - | - | - | - |
1) Cu is determined by the difference between the impurity total and 100%. The Cu value is exclusive of Ag.
Note: This is a high conductivity copper which has, in the annealed condition a minimum concuctivity of 100% IACS except for Alloy C10100 which has a minimum conductivity of 101% IACS.
Note: The following additional impurity maximum limits shall apply: Bi, 1ppm (.0001%); Cd, 1ppm (.0001%); Fe, 10ppm (.0010%); Pb, 5ppm (.0005%); Mn, 0.5ppm (.00005%); Ni, 10ppm (.0010%); Se, 3ppm (.0003%); Ag, 25ppm(.0025%);S, 15ppm (.0015%); Sn, 2ppm (.0002%); Zn, 1ppm (.0001%).