C95200 (9A) Aluminum Bronze

Your RFQ Cart has: 0 item(s) !

National Bronze & Metals, Inc.

National Bronze & Metals, Inc.

LEADING USA MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE & COPPER ALLOYS

HOME | LOGIN / REGISTER | LOCATIONS | RFQ CART

Toll Free: 800-231-0771

Click to Email Us

- Brass Alloys
  
  Bronze Alloys
  
  Copper Alloys
- Oil and Gas
  
  Aerospace
  
  RWMA
  
  Lead Free
  
  Sheet and Plate
  
  Brass Tube and Pipe
- Corporate Office
  
  Foundry
  
  Quality Control
  
  Long Service Awards
  
  Faces of NBM
  
  Employment at NBM
- Accreditations & Certifications
  
  Spec Sheets & Product Information
  
  Industry Links
  
  NBM Toolbox
- Trade Shows
  
  Press Releases
  
  Educational Seminars
  
  Photo Galleries
- Material Specifications
  
  Bare Bright Copper
  
  Number 1 Copper
  
  Number 2 Copper
  
  CDA Alloy 360 Free Cutting Brass
  
  CDA Alloy 260 (70 - 30)
  
  CDA Alloy 932 (Hard Brass)
  
  CDA Alloy 836 (Red Brass)
  
  CDA Alloy 844 (Semi-Red Brass)
  
  EC Aluminum
  
  CDA Alloys, Lead, Solders and Tin
  
  ISRI Membership
- Environmental, Health & Safety Specifications
  
  Unacceptable Material Condition
  
  General Receiving Specifications
  
  Scrap Packaging Specifications

Diameter Hollow

C95200 (9A) Aluminum Bronze

TYPICAL USES FOR C95200 ALUMINUM BRONZE

ELECTRICAL: Electrical Hardware
FASTENERS: Nuts
INDUSTRIAL: Pickling Tanks, Mild Alkali Applications, Large Gear Parts, Hydrant Parts, Valve Seats, Hot Mill Guides, Welding Jaws, Pickling Equipment, Worm Wheels, Worms, Valve Bodies, Wear Plates, Thrust Pads, Bearing Liners, Pump Parts, Valves, High Strength Clamps, Acid Resistant Pumps, Bearings, Bushings, Gears, Plungers, Pump Rods
MARINE: Marine Hardware, Covers for Marine Hardware, Propellers, Marine Engines
ORDINANCE: Gun Mountings, Gun Slides

<<< SEE SIZES & SPECS BELOW >>

CHEMICAL COMPOSITION

	Al	Cu	Fe
Min/Max	8.5-9.5	86.0 min	2.5-4.0
Nominals	9.0000	87.7000	3.3000

TEMPER

Product Type	Temper Type
Centrifugal	ASME SB271, ASTM B271, SAE J461, J462
Continuous	ASME B505, ASTM B505, SAE J461, J462
Flanges	ASME B16.24, SB148, ASTM B148
Ingot	ASTM B30
Sand	ASME SB148, ASTM B763, B148, SAE J461, J462

MECHANICAL PROPERTIES

Temper	Sect. Size	Cold Work	Type Min	Temp	Tensile Strength	YS 0.05% UL	YS 0.02% Offset	YS 0.005% Offset	Elong.	RH B	RH C	RH F	RH 30T	VH 500	BH 500	BH 3000	Shear Strgth	Fatigue Strgth	Izod Impact Strgth
-	in.	%	-	F	ksi	ksi	ksi	ksi	%	B	C	F	30T	500	500	3000	ksi	ksi	ft-lb
-	mm.	-	-	C	MPa	MPa	MPa	MPa	-	-	-	-	-	-	-	-	MPa	MPa	J
As Centrifugal Cast
M02				68	65	25	-	-	-	-	-	-	-	-	-	110	-	-
M02		0	SMIN	20	450	170	-	-	20	-	-	-	-	-	-	110	-	-	0
As Continous Cast
M07				68	68	26	-	-	-	-	-	-	-	-	-	-	-	-
M07		0	SMIN	20	469	179	-	-	20	-	-	-	-	-	-	-	-	-	0
As Permanent Mold Cast
M05				68	93	35	-	-	-	-	-	-	-	-	-	-	-	-
M05		0	TYP	20	640	240	-	-	38	78	-	-	-	-	-	-	-	-	0
As Sand Cast
M01				68	65	25	-	-	-	-	-	-	-	-	-	110	-	-
M01		0	SMIN	20	448	172	-	-	20	-	-	-	-	-	-	110	-	-	0
M01				68	80	27	-	-	-	-	-	-	-	-	-	125	40	22
M01		0	TYP	20	552	186	-	-	35	-	-	-	-	-	-	125	276	152	0

PHYSICAL PROPERTIES

Product Property	US Customary	Metric
Coefficient of Thermal Expansion	9.0 ·10-6 per oF (68-572 F)	16.2 ·10-6 per oC (20-300 C)
Density	0.276 lb/in3 at 68 F	7.64 gm/cm3 @ 20 C
Electrical Conductivity	11 %IACS @ 68 F	0.064 MegaSiemens/cm @ 20 C
Electrical Resistivity	94.0 ohms-cmil/ft @ 68 F	15.63 microhm-cm @ 20 C
Magnetic Permeability	1.1	1.2
Melting Point - Liquidus	1913 F	1045 C
Melting Point - Solidus	1907 F	1042 C
Modulas of Elasticity in Tension	15000 ksi	103400 MPa
Poisson's Ratio	0.31	0.31
Specific Gravity	7.64	7.64
Specific Heat Capacity	0.09 Btu/lb/oF at 68 F	377.1 J/kg · oK at 293 K
Thermal Conductivity	29.1 Btu · ft/(hr · ft2·oF)at 68F	50.4 W/m · oK at 20 C

FABRICATION

Joining Technique	Suitability
Brazing	Good
Coated Metal Arc Welding	Good
Gas Shielded Arc Welding	Excellent
Machinability Rating	20
Oxyacetylene Welding	Not Recommended
Soldering	Good

SPECIFICATIONS

End Product	Specification
Centrifugal	ASME SB271, ASTM B271, SAE J461, J462
Continuous	ASME B505, ASTM B505, SAE J461, J462
Flanges	ASME B16.24, SB148, ASTM B148
Ingot	ASTM B30
Sand	ASME SB148, ASTM B763, B148, SAE J461, J462

Browse By Metal

Browse By Metal

Get National Bronze & Metals, Inc. Updates. Sign-up for email updates to receive current company and special information.

Sign Up for Email Updates!

Get National Bronze & Metals, Inc. Updates. Sign-up for email updates to receive current Company and Special informaiton.

© Copyright 1983 - 2010 National Bronze & Metals, Inc. ALL Rights RESERVED