Login/Register
2929 W 12th St. Houston, TX 77008 · (p)713.869.9600 · (f) 713.869.9124 · (toll) 800.231.0771 · (e) sales@nbmmetals.com
Custom Search
Now In: Cast Alloys → C93400 High Leaded Tin Bronze
  • Diameter
    		•       

    C93400 High Leaded Tin Bronze

    TYPICAL USES FOR C93400 HIGH LEADED TIN BRONZE 

    • FASTENERS: Washers
    • INDUSTRIAL: Bearings, Pump Impellers, Bearings, Bushings, Slide Bars, Corrosion Resistant Castings

     <<< SEE SIZES & SPECS BELOW >>



      
    CHEMICAL COMPOSITION


    		 Al Sb Cu Fe Pb Ni P Si S Sn Zn
    Min/Max 0.005 0.5 82.0 - 85.0 0.2 7.0 - 9.0 1 0.5 0.005 0.08 7.0 - 9.0 0.8
    Nominals - - 83.5000 - 8.0000 - - - - 8.0000 -
    TEMPER

    Product Type Temper Type
    Continuous ASTM B505
    Ingot ASTM B30
    Sand ASTM B66
    MECHANICAL PROPERTIES

    Temper Sect. Size Cold Work Type Min Temp Tensile Strength YS
    0.05% UL     		YS
    0.02% Offset     		YS
    0.005% Offset     		Elong. RH
    B     		RH
    C     		RH
    F     		RH
    30T     		VH
    500     		BH
    500     		BH
    3000     		Shear
    Strgth     		Fatigue
    Strgth     		Izod
    Impact
    Strgth
    - in. % - F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb
    - mm. - - C MPa MPa MPa MPa - - - - - - - - MPa MPa J
    As Centrifugal Cast
    M07 68 34 20 - - - - - - - - - - - -
    M07 0 SMIN 20 234 138 - - 8 - - - - - - - - - 0
    As Sand Cast
    M01 68 32 16 - - - - - - - - - - - 15
    M01 0 TYP 20 221 110 - - 20 - - - - - 60 - - 103 0
    PHYSICAL PROPERTIES

    Product Property US Customary Metric
    Coefficient of Thermal Expansion 10.0 ·10-6 per oF (68-392 F) 18.0 ·10-6 per oC (20-200 C)
    Density 0.32 lb/in3 at 68 F 8.86 gm/cm3 @ 20 C
    Electrical Conductivity 12 %IACS @ 68 F 0.07 MegaSiemens/cm @ 20 C
    Electrical Resistivity 85.9 ohms-cmil/ft @ 68 F 14.29 microhm-cm @ 20 C
    Modulas of Elasticity in Tension 11000 ksi 75800 MPa
    Specific Gravity 8.86 8.86
    Specific Heat Capacity 0.09 Btu/lb/oF at 68 F 377.1 J/kg · oK at 293 K
    Thermal Conductivity 33.6 Btu · ft/(hr · ft2·oF)at 68F 58.2 W/m · oK at 20 C
    FABRICATION

    Joining Technique Suitability
    Brazing Good
    Coated Metal Arc Welding Not Recommended
    Gas Shielded Arc Welding Not Recommended
    Machinability Rating 70
    Oxyacetylene Welding Not Recommended
    Soldering Good
    SPECIFICATIONS

    End Product Specification
    Continuous ASTM B505
    Ingot ASTM B30
    Sand ASTM B66