Login/Register
2929 W 12th St. Houston, TX 77008 · (p)713.869.9600 · (f) 713.869.9124 · (toll) 800.231.0771 · (e) sales@nbmmetals.com
Custom Search
Now In: Cast Alloys → C92200 Leaded Tin Bronze "Navy M"
  • Diameter
    		•
  • Diameter Hollow
    		•
  • Profile
    		•
  • Rectangular
    		•
  • Square
    		•       

    C92200 Leaded Tin Bronze "Navy M"

    TYPICAL USES FOR C92200 LEADED TIN BRONZE "NAVY M"

    • ARCHITECTURE: Ornamental Castings
    • BUILDING: Cooling Equipment, Heating Equipment
    • FASTENERS: Nuts
    • INDUSTRIAL: Fittings Used to 550 F, Gears, Bushings, Bearings, Pump Impellers, Pumps Used to 550 F, Cryogenic Valves, Valves for Water Meters, Medium Pressure Hydraulic Equipment, Piston Rings, Valve Components
    • MARINE: Marine Castings
    • PLUMBING: Medium Pressure Steam Equipment to 550 F

     
    <<< SEE SIZES & SPECS BELOW >>



      
    CHEMICAL COMPOSITION


    		 Al Sb Cu Fe Pb Ni P Si S Sn Zn
    Min/Max 0.005 0.25 86.0 - 90.0 0.25 1.0 - 2.0 1 0.05 0.005 0.05 5.5 - 6.5 3.0 - 5.0
    Nominals - - 88.0000 - 1.5000 - - - - 6.0000 4.5000
    TEMPER

    Product Type Temper Type
    Centrifugal ASTM B271, SAE J462, J461
    Continuous ASTM B505, SAE J461, J462
    Fittings ASME B16.24, SB61, ASTM B61, FEDERAL WW-P-460
    Flanges ASME SB61, ASTM B61, FEDERAL WW-P-460
    Ingot ASTM B30
    Sand ASME SB61, SB584, ASTM B61, B584, SAE J461, J462
    Valves MILITARY MIL-V-17547
    MECHANICAL PROPERTIES

    Temper Sect. Size Cold Work Type Min Temp Tensile Strength YS
    0.05% UL     		YS
    0.02% Offset     		YS
    0.005% Offset     		Elong. RH
    B     		RH
    C     		RH
    F     		RH
    30T     		VH
    500     		BH
    500     		BH
    3000     		Shear
    Strgth     		Fatigue
    Strgth     		Izod
    Impact
    Strgth
    - in. % - F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb
    - mm. - - C MPa MPa MPa MPa - - - - - - - - MPa MPa J
    As Centrifugal Cast
    M02 68 34 16 - - - - - - - - - - - -
    M02 0 SMIN 20 234 110 - - 22 - - - - - - - - - 0
    As Continous Cast
    M07 68 38 19 - - - - - - - - - - - -
    M07 0 SMIN 20 262 131 - - 18 - - - - - - - - - 0
    As Permanent Mold Cast
    M05 68 34 16 - - - - - - - - - - - -
    M05 0 SMIN 20 234 110 - - 24 - - - - - - - - - 0
    As Sand Cast
    M01 68 34 16 - - - - - - - - - - - -
    M01 0 SMIN 20 234 110 - - 22 - - - - - - - - - 0
    M01 68 40 20 - - - - - - - - - - - 11
    M01 0 TYP 20 276 138 - - 30 - - - - - 65 - - 76 0
    PHYSICAL PROPERTIES

    Product Property US Customary Metric
    Coefficient of Thermal Expansion 10.0 ·10-6 per oF (68-572 F) 18.0 ·10-6 per oC (20-200 C)
    Density 0.312 lb/in3 at 68 F 8.64 gm/cm3 @ 20 C
    Electrical Conductivity 14 %IACS @ 68 F 0.083 MegaSiemens/cm @ 20 C
    Electrical Resistivity 72.5 ohms-cmil/ft @ 68 F 12.00 microhm-cm @ 20 C
    Incipient Melting 600 oF 315 C
    Magnetic Permeability 1 1
    Melting Point - Liquidus 1810 F 988 C
    Melting Point - Solidus 1518 F 826 C
    Modulas of Elasticity in Tension 14000 ksi 96500 MPa
    Specific Gravity 8.64 8.64
    Specific Heat Capacity 0.09 Btu/lb/oF at 68 F 377.1 J/kg · oK at 293 K
    Thermal Conductivity 40.2 Btu · ft/(hr · ft2·oF)at 68F 69.6 W/m · oK at 20 C
    FABRICATION

    Joining Technique Suitability
    Brazing Excellent
    Coated Metal Arc Welding Not Recommended
    Gas Shielded Arc Welding Not Recommended
    Machinability Rating 42
    Oxyacetylene Welding Not Recommended
    Soldering Excellent
    SPECIFICATIONS

    End Product Specification
    Centrifugal ASTM B271, SAE J462, J461
    Continuous ASTM B505, SAE J461, J462
    Fittings ASME B16.24, SB61, ASTM B61, FEDERAL WW-P-460
    Flanges ASME SB61, ASTM B61, FEDERAL WW-P-460
    Ingot ASTM B30
    Sand ASME SB61, SB584, ASTM B61, B584, SAE J461, J462
    Valves MILITARY MIL-V-17547