C62300 Aluminum Bronze

Diameter

C62300 Aluminum Bronze
ASTM B150

C62300 and C62400 aluminum bronze applications include valve and pump components for industrial process streams, as well as for marine equipment, high strength fasteners and pole line hardware.

TYPICAL USES FOR C62300 ALUMINUM BRONZE

FASTENERS: Nuts, Bolts
INDUSTRIAL: Gears, Bearing Races, Valve Stems, Worm Gears, Valve Guides, Valve Seats, Bearings, Bushings, Cams, Pump Rods
MARINE: Marine Hardware

<<< SEE SIZES & SPECS BELOW >>

CHEMICAL COMPOSITION

	Al	Cu	Fe	Mn	Ni	Si	Sn
Min/Max	8.5 - 10.0	Rem	2.0 - 4.0	0.5	1	0.25	0.6
Nominals	10.0000	87.0000	3.0000	-	-	-	-

TEMPER

Product Type	Temper Type
Bar	AMS 4635, ASME SB150, ASTM B150, SAE J463, J461
Bar, Forging	ASTM B124
Forgings, Die	AMS 4635, ASTM B283, MILITARY MIL-B-16166, SAE J463, J461
Rod	AMS 4635, ASME SB150, ASTM B150, SAE J463, J461
Rod, Forgings	ASTM B124
Shapes	ASTM B150
Shapes, Forging	ASTM B124

MECHANICAL PROPERTIES

Temper	Sect. Size	Cold Work	Type Min	Temp	Tensile Strength	YS 0.05% UL	YS 0.02% Offset	YS 0.005% Offset	Elong.	RH B	RH C	RH F	RH 30T	VH 500	BH 500	BH 3000	Shear Strgth	Fatigue Strgth	Izod Impact Strgth
-	in.	%	-	F	ksi	ksi	ksi	ksi	%	B	C	F	30T	500	500	3000	ksi	ksi	ft-lb
-	mm.	-	-	C	MPa	MPa	MPa	MPa	-	-	-	-	-	-	-	-	MPa	MPa	J
BAR
H02	2.01			68	85	40	-	-	-	-	-	-	-	-	-	-	-	-
H02	51	15	TYP	20	586	276	-	-	30	82	-	-	-	-	-	-	-	-	0
H02	1			68	90	45	-	-	-	-	-	-	-	-	-	-	-	-
H02	25.4	15	TYP	20	621	310	-	-	30	85	-	-	-	-	-	-	-	-	0
M20	0.98			68	80	35	-	-	-	-	-	-	-	-	-	-	-	-
M20	25			20	550	240	-	-	-	-	-	-	-	-	-	-	-	-	0
M20	0.98 - 1.97			68	78	32	-	-	-	-	-	-	-	-	-	-	-	-
M20	25 - 50			20	540	220	-	-	-	-	-	-	-	-	-	-	-	-	0
M30	2.99			68	75	35	-	-	-	-	-	-	-	-	-	-	-	-
M30	76	0	TYP	20	517	241	-	-	35	80	-	-	-	-	-	-	-	-	0
ROD
H02	0.5			68	98	52	-	-	-	-	-	-	-	-	-	-	52	31
H02	12.7	0	TYP	20	676	359	-	-	22	89	-	-	-	-	-	-	359	214	0
H02	1			68	95	50	-	-	-	-	-	-	-	-	-	-	50	30
H02	25.4	15	TYP	20	655	345	-	-	25	88	-	-	-	-	-	-	345	207	0
H02	2.99			68	87	45	-	-	-	-	-	-	-	-	-	-	46	29
H02	76	15	TYP	20	600	310	-	-	35	85	-	-	-	-	-	-	317	200	0
M30	4.02			68	75	35	-	-	-	-	-	-	-	-	-	-	35	25
M30	102	0	TYP	20	517	241	-	-	35	80	-	-	-	-	-	-	241	172	0
H02	2.01			68	92	48	-	-	-	-	-	-	-	-	-	-	48	30
H02	51	15	TYP	20	634	331	-	-	28	87	-	-	-	-	-	-	331	207	0
HR50	0.47			68	90	50	-	-	-	-	-	-	-	-	-	-	-	-
HR50	12			20	620	345	-	-	12	-	-	-	-	-	-	-	-	-	0
				68	88	44	-	-	-	-	-	-	-	-	-	-	-	-
				20	605	305	-	-	15	-	-	-	-	-	-	-	-	-	0
				68	84	40	-	-	-	-	-	-	-	-	-	-	-	-
				20	580	275	-	-	15	-	-	-	-	-	-	-	-	-	0
				68	76	37	-	-	-	-	-	-	-	-	-	-	-	-
				20	525	255	-	-	20	-	-	-	-	-	-	-	-	-	0

PHYSICAL PROPERTIES

Product Property	US Customary	Metric
Coefficient of Thermal Expansion	9.0 ·10-6 per oF (68-572 F)	16.2 ∙ 10 6ֿ per ˚C (20-300 C)
Density	0.277 lb/in3 @ 68 F	7.67 gm/cm3 @ 20 C
Electrical Conductivity	12 %IACS @ 68 F	0.07 MegaSiemens/cm @ 20 C
Electrical Resistivity	86.4 ohms-cmil/ft @ 68 F	14.36 microhm-cm @ 20 C
Melting Point Liquid US	1915 F	1046 C
Melting Point Solid US	1905 F	1041 C
Modulas of Elasticity in Tension	17000 ksi	117000 MPa
Modulas of Rigidity	6400 ksi	44130 MPa
Specific Gravity	7.67	7.67
Specific Heat Capacity	0.09 Btu/lb/˚F @ 68 F	377.1 J/kg ∙ ˚K at 293 K
Thermal Conductivity	31.0 Btu ∙ ft/(hr ∙ ft2 ∙˚F) @ 68 F	53.7 W/m ∙ ˚K at 20 C

FABRICATION

Joining Technique	Suitability
Brazing	Fair
Butt Weld	Good
Capacity for Being Cold Worked	Good
Capacity for Being Hot Formed	Good
Coated Metal Arc Welding	Good
Forgeability Rating	75
Gas Sheilded Arc Welding	Good
Machinability rating	50
Oxyacetylene Welding	Not Recommended
Seam Weld	Good
Soldering	Not Recommended
Spot Weld	Good

SPECIFICATIONS

End Product	Specification
Bar	AMS 4635, ASME SB150, ASTM B150, SAE J463, J461
Bar, Forging	ASTM B124
Forgings, Die	AMS 4635, ASTM B283, MILITARY MIL-B-16166, SAE J463, J461
Rod	AMS 4635, ASME SB150, ASTM B150, SAE J463, J461
Rod, Forgings	ASTM B124
Shapes	ASTM B150
Shapes, Forging	ASTM B124